Results 1 to 3 of 3
Thread: CTS-V/ ZL1 Brembo wheel fitment
-
2 Weeks Ago #1
Registered User
- Join Date
- Dec 2011
- Location
- Oregon coast
- Posts
- 182
CTS-V/ ZL1 Brembo wheel fitment
Anybody have experience running the Big 6 piston Brembo calipers from the 2nd gen CTS-v and ZL1 Camaros on US mag wheels. I've got 18" US mags U127 rambler wheels and am looking at some of the big boy Brembo's but I'm not sure they'll fit on my current set up. any feedback would be appreciated,
Thanks
-
2 Weeks Ago #2
Registered User
- Join Date
- Dec 2011
- Location
- Oregon coast
- Posts
- 182
Update…probably won’t fit. aside from the caliper thickness the cts-v six piston brembos require 14” rotors too which will almost assuredly hit the inside of a 18” rim. I think the ZL1s and CTS-V ran minimum 19” wheels. I’m gonna probably go with newer Camaro 4 piston Brembos. Which should fit with my current set up.
-
1 Week Ago #3
Registered User
- Join Date
- Mar 2015
- Posts
- 10
They actually use a 14.6 rotor and yes they do fit into a 18, better than the 4 piston set ups actually. This is a C5 thin spoke wheel from the rear, it is a 18, same 14.6 6 piston as the V2 and ZL1 5th gen
You can see more examples here https://bigbrakeupgrade.com/what-cus...ying-about-us/
-
Reply With Quote
